Using The Self-Timer - Canon PowerShot SD750 Digital ELPH User Manual

Using the Self-Timer
1.
Press the ~ button (CD) and use the'" or .. button
(@)
to display
ltl, til
or
~.
• You can also use the touch control dial to make a selection ..
• When the shutter button is pressed fully, the self-timer will
activate and the self-timer lamp will blink (when using red-eye
reduction, it will stay lit for the last 2 seconds).
• You can change the delay time and number of shots with the
~
option (p. 18).
To Cancel: press the
~
button and display
(iJ.
10 sec. Self-Timer: shoots 10 sec. after you press the shutter
button.
ltl
2 sec. before the shutter releases, the self-timer lamp and sound
speed up*1.
2 sec. Self-Timer: shoots 2 sec. after you press the shutter
button.
til ·
The self-timer sound beeps quickly*1 when you press the shutter
button and the shutter releases 2 sec. later.
Custom Timer: you can change the delay time (0-10*2, 15, 20,
30 sec.) and number of shots (1-3*2_10).
~
• When [Delay] is set to 2 or more sec., the self-timer sound beeps
quickly 2 sec. before the shutter releases. When [Shots] is set to
more than 1, the self-timer sound only beeps before the first shot.
*1 This may differ depending on your My Camera settings (Advancecl Guide p. 110).
*2 Default setting.
The self-timer cannot be used in some shooting modes.
E3SeetheAdvancedGuide: Functions Avai.lable in Each Shooting Mode (p. 160).
&I
SeeSelectir!ga Shooting Mode (p.12).
-
en
::r
o
sa.
5·
c.c
-------------11
17