Setting Your Answer Mode - Samsung DS24D User Instruction

DS 616
TECHNICAL MANUAL

1.5 SETTING YOUR ANSWER MODE

Each keyset can have its answer mode for intercom calls set to one of the following
options:
RING—The station will ring in one of eight custom ring patterns. Calls are answered by
pressing the Speaker key or lifting the handset.
AUTO—After giving a short attention tone, the station will automatically answer calls on
the speakerphone. When a C.O. line is transferred to a station in Auto Answer, the
screened portion of the call will be Auto Answer, but the keyset will ring when the
transfer is complete if the user has not pressed the Speaker key or lifted the handset.
VOICE—The station will not ring. After a short attention tone, callers can make an
annoucement. The called party must press the Speaker key or lift the handset to reply.
ACTION
1. Press the Transfer key followed by 103
Display shows
2. Dial 0, 1 or 2 to change the ring mode, e.g., 2
OR
Press UP or DOWN to select the ring mode
3. Press the Transfer key to store and exit
Home Page
DISPLAY
[201] ANS MODE
RING MODE
[201] ANS MODE
VOICE ANNOUNCE
1.7
Table of Contents
USER INSTRUCTIONS
PART 1 JUNE 2004