Digital Audio Connections; Connecting Usb Storage Devices - Pioneer N-70A-K/-S Operating Instructions Manual

2
2

Digital audio connections

Digital audio output connections
By connecting this unit's digital audio output to the digital
audio input of an AV receiver or D/A converter, etc, you can
use the amplifier to enjoy digital audio produced from this
unit.
DIGITAL IN
AV receiver, D/A
converter, etc.
Coaxial digital cable
(commercially available)
DIGITAL IN
OPTICAL
AV receiver, D/A
converter, etc.
Optical digital cable
(commercially available)
ANALOG OUT
R L
indicates the direction of the signal.
Note
• Digital signal formats that can be output from this unit
include linear PCM signals with sampling rate and
quantitative bits up to 192 kHz/24 bits (Depending on the
connected device and environment, operation may not be
successful).
10
Digital audio input connections
By connecting a digital audio component's audio output to
this unit's digital audio input, this unit can be used as a D/A
converter. For details regarding the audio output of signals
input to the DIGITAL IN connectors, see the section Using the
D/A converter on page 30.
COAXIAL
AL OUT
DIGITAL OUT
COAXIAL
DC OUTPUT
For
OPTICAL COAXIAL OPTI
WIRELESS
LAN
LAN (10/100) DC OUTPUT CONT
For
OU
WIRELESS
V 0.6A MAX)
LAN
(5V 0.6A MAX)
Note
• Digital signal formats that can be input to this unit include
linear PCM signals with sampling rate and quantitative bits
up to 192 kHz/24 bits. (Depending on the connected device
and environment, operation may not be successful.)
DIGITAL OUT
OPTICAL
Digital audio
equipment, etc.
Optical digital cable
(commercially available)
DIGITAL OUT
COAXIAL
Digital audio
equipment, etc.
Coaxial digital cable
(commercially available)
DIGITAL IN

2 1
OPTICAL COAXIAL
CONTROL DIGITAL IN
OUT
iPod/iPhone
5V 1A USB DAC
indicates the direction of the signal.
Connecting your equipment

Connecting USB storage devices

It is possible to listen to two-channel audio using the USB
terminal on the front or the rear of this unit.
1
Connect your USB device/External HDD to the USB
terminal on the front panel of this unit.
• This unit does not support a USB hub.
Front panel
/I STANDBY/ON
STANDBY DIRECT Hi-Bit 32 Up Sampling
5V 1A
iPod/iPhone
USB cable (commercially
available)
USB storage device
(commercially available)
Rear panel
DIGITAL OUT
ANALOG OUT
OPTICAL COAXIAL
R L
LAN (10/100) DC OUTPUT
WIRELESS
(5V
AC IN
USB storage device
(commercially available)
USB cable (commercially available)
*1: If the external HDD has multiple partitions,
the head partition must be formatted as FAT32.
Furthermore, only the head partition can be used.
Note
• If you are using an external HDD with a power switch, make
sure that the external HDD power is turned on before
turning on the power for this unit.
• When connecting or disconnecting USB devices, ensure
that the power to this unit is always off.
• We recommend that you connect the external HDD to the
back of this unit. When it is connected to the front of this
unit, it may take time for the unit to recognize the external
HDD if switched to iPod/USB Front Function.
N-50A
NETWORK AUDIO PLAYER
SOURCE SOURCE  
 
External HDD*1,
and such
AC IN
DIGITAL IN

2 1
OPTICAL COAXIAL
DIGITAL IN
CONTROL
For
OUT
iPod/iPhone
LAN
0.6A MAX) 5V 1A USB DAC
External HDD*1,
and such