Connections With An Amplifier - Pioneer N-70AE Instruction Manual

> Before Start > Part Names

Connections with an amplifier

Install
1
a
2
a
N-70AE is used in the illustrations. N-50AE does not
have an XLR jack.
a Analog Audio Cable
> Install > Initial Setup
This unit
You can play the audio from network features such as
internet radio and from devices connected to this unit
through speaker systems connected to integrated
amplifiers or AV receivers. Connect to suit the input jacks
on your amplifier.
> Playback
Supplementary information | Advanced Setup | Others
1
a
2
Integrated amplifier, AV receiver, etc.
Connecting with an analog audio cable
The signal is converted to analog in the D/A converter of
this unit and then output to an integrated amplifier, for
example. Connect the LINE IN jacks on an integrated
amplifier with the supplied analog audio cable to the
ANALOG OUT jack on this unit.
E
N
9