Common Windows Problems - Xerox WorkCentre 3025BI User Manual

Condition
Before printing, the machine
emits vapor near the output
tray.
The machine does not print
special- sized paper, such as
billing paper.

Common Windows Problems

Condition
"File in Use" message appears during installation.
"General Protection Fault", "Exception OE", "Spool
32", or "Illegal Operation" messages appear.
"Fail To Print", "A printer timeout error occurred"
messages appear.
Note: Refer to the Microsoft Windows User Guide supplied with your computer for further
information on Windows error messages.
Possible Cause
Using damp paper can cause
vapor during printing.
Paper size and paper size
setting do not match.
• Exit all software applications. Remove all software
• Close all other applications, reboot Windows and
• These messages may appear during printing. Just
Suggested Solutions
• Load a new batch of paper.
• To avoid the paper absorbing too
much moisture, do not open
packages of paper until required.
• Set the correct paper size in the
Custom Paper Size Settings in the
Paper tab in the Printing
Preferences.
Suggested Solutions
from the printer's startup group, then restart
Windows. Re-install the printer driver.
try printing again.
keep waiting until the machine finishes printing.
If the message appears in standby mode or after
printing has been completed, check the
connection and/or whether an error has occurred.
®
Xerox WorkCentre
Common Problems
® 193
3025
User Guide