Load Originals; Original Loaded Indicator - Utax 206ci User Manual

Common Operations > Loading Originals
2
?

Load Originals.

With the side to be scanned face up, insert the leading edge of the original all the way into the
document processor. If the original is two-sided, insert with the front side face up.
IMPORTANT
Ensure that loaded originals do not exceed the level indicator. Exceeding the
maximum level may cause the originals to jam (see the figure).
Confirm that the original width guides exactly fit the originals. If there is a gap,
readjust the original width guides. The gap may cause the originals to jam.
Originals with punched holes or perforated lines should be placed in such a way that
the holes or perforations will be scanned last (not first).

Original Loaded Indicator

The original loaded indicator lights depending on how originals are placed.
• Green (left indicator) lit: Original is placed properly.
3-9