Care And Maintenance; Tyre Pressure - Pride Legend Owner's Manual

X . C A R E
Your Legend requires minimal of care and maintenance. If you do not feel confident in your ability to perform the
maintenance listed below, you may schedule inspection and maintenance at your authorized Pride provider. The
following areas require periodic inspection and/or care and maintenance.

TYRE PRESSURE

n For optimum Scooter performance we recommend that the tyre pressure be maintained at 30 psi.
WARNING! Do not exceed 30 psi; overinflated tyers can explode.
n Regularly inspect your Legend’s tyres for signs of wear.
n Use a rubber conditioner on your Legend’s tyres to help to preserve them.
WARNING! Do not apply rubber conditioner on tread area of tyres; the tyres may become danger-
ously slippery.
EXTERIOR SURFACES
n Bumpers and trim benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not apply rubber conditioner on a Scooters vinyl seat; it may become dangerously
slippery.
BATTERY TERMINAL CONNECTIONS
n Ensure that the terminal connections remain tight and uncorroded.
n Ensure that the batteries sit flat in the battery wells.
n Ensure that the battery terminals face the rear of your Scooter.
WIRING HARNESSES
n Regularly check all wiring connections.
n Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n Have your authorized provider repair or replace any damaged connector, connection, or insulation before you
use your Scooter.
ABS PLASTIC SHROUDS
n Apply a light coat of car wax to the shrouds to help retain their high gloss. The shrouds are made from durable
ABS plastic and are coated with an advanced formula urethane paint.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE SCOOTER ASSEMBLY
n You do not need to lubricate these items, as they are all prelubricated and sealed.
Legend
A N D M A I N T E N A N C E
31