Integral 33
Commissioning
When you receive your handset, it is registered in the system and ready for
operation. All you need to do is connect the supplied charger.
If you wish to register your handset in another system, refer to Page 49.
Placement of the charger
Place the charger on a solid, even surface, e.g. a table. Choose a location
that is protected from direct sunlight and dampness. Please also observe
the information on P. 54.
Insert the mains plug into a socket. The charger is ready for operation.
Charging the handset
Simply place the handset into the
charger. You will hear an
acknowledgement tone. The display
and keypad lights will switch on
briefly. The battery symbol in the
symbol line will start to move. The
battery is being charged.
When the batteries are being
charged, they will become slightly
warm. This is perfectly normal.
Before using the handset for the first time, the batteries should be charged
for at least 8 hours.
New battery cells will generally only reach their full capacity after several
days of standard operation.
Getting to know your handset
Charging
indicator light
for replacement
battery
i
7