Samsung iDCS 100 General Description Manual page 43

BASIC RATE INTERFACE (BRI)
The iDCS 100 BRI card supports trunk or station level Basic Rate Interface services
(BRI). Trunk or station BRI use is software programmable. BRI allows simultaneous
data calls, called party and calling number identification, high speed call setup
and disconnect are among the benefits of ISDN calling. The 2B+D configuration of
ISDN allows call information to be delivered via the data channel (the "D" of 2B+D)
thus leaving the bearer channels (the "B" of 2B+D) available for single use or
combined use to provide a wider bandwidth for data and video.
LAN INTERFACE
(MEM4 CARD ONLY)
The iDCS 100 LAN card provides a 10/100 base T Ethernet interface for connection
to a data network. This interface allows a high speed connection for PC program-
ming across an IP network. This interface also allows the system software to be
uploaded to the Flash Memory via the PCMMC program.
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the most cost effec-
tive central office route for the outside number dialed by any station. The iDCS 100
LCR program includes the following features:
Option to use or not use LCR or a tenant basis
!
Programmable LCR access code
!
Digit analysis table 1000 entries each with ten digits for a iDCS 100 system.
!
Routing by time of day and day of week (4 time bands per day)
!
Routing according to individual station class
!
Modify digits table 100 entries for an iDCS 100 system.
!
Flexible trunk group advance timer
!
Option to use or not use trunk group advance warning tones
!
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset or personal computer
without interrupting normal system operation. There are 3 levels of programming:
technician, customer and station. The technician level has access to all programs
and can allow the customer access to system programs as needed. Technician
and customer access are controlled by different security passcodes. Programming
from a PC requires the PCMMC program. The system can also be programmed
remotely via an optional modem card or over the internet via the LAN with a MEM4.
MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the
paged party to meet the user for a private conversation.
MEMORY PROTECTION
In the event that power is lost to the system, all customer data contained in memory
is retained by the use of a "super capacitor" for approximately 7 days. Additionally,
4.16
HOME
PAGE
Table of
Contents