Panasonic DP-150FP Operating Instructions Manual page 54

Sending Documents
ADF Scanning
4
The machine starts to dial the telephone number.
a
Platen Glass (Flatbed) Scanning
4
When an original is placed on the Platen Glass,
b
the display is as shown to the right.
Press
Platen Glass and press
(see Note 1) (see Note 2) (see Note 3)
NOTE
1. If you need a special access number to get an outside line, dial it first then press
pause (represented by a "-") before dialling the full number.
Ex
: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press
TONE
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex
: 9 PAUSE TONE 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP?
1:YES 2:NO
Press
setting of the Communication Journal.
54
or to select the size of the original on the
START
(represented by a "/").
" "
1 to stop the transmission. The Communication Journal will not print regardless of the printout mode
to start dialling.
CLEAR/STOP .
* DIALING *
5551234
ORIGINAL=LETTER
PRESS START
REDIAL/PAUSE
to enter a