Table of Contents
Advertisement
TG7200-7220TW(e-e).book Page 30 Wednesday, April 25, 2007 4:49 PM
Multi-unit Operation
5
Select the handset(s) you want to
cancel, by pressing the desired
handset number. i {j/OK}
L The selected handset number(s)
will flash.
L To cancel a selected handset
number, press the number again.
The number will stop flashing.
6
{^}/{V}: "Yes" i {>}
L A long beep will sound as each
handset number disappears.
L The handset does not beep when
cancelling its own registration.
7
{ih}
Intercom between
handsets
Intercom calls can be made between
handsets.
Example: When handset 1 calls
handset 2
1
Handset 1:
{INT} i Press {2} (desired
handset number).
2
Handset 2:
{C}
3
When finished talking, press
{ih}.
Transferring calls
between handsets
Outside calls can be transferred
between 2 people.
Example: When handset 1 transfers a
call to handset 2
1
Handset 1:
30
During an outside call, press {INT}.
i Press {2} (desired handset
number).
L The outside call will be put on
hold.
L If there is no answer, press {INT}
to return to the outside call.
2
Handset 2:
Press {C} to answer the page.
L Handset 2 can talk with handset
1.
3
Handset 1:
To complete the call transfer, press
{ih}.
Transferring a call without speaking
to the other handset user
1
During an outside call, press {INT}.
i Press the desired handset
number.
L k flashes to indicate the outside
call is on hold.
2
{ih}
L The outside call rings at the other
handset.
Note:
L If the other handset user does not
answer the call within 1 minute, the
call will ring at your handset again.
Conference calls
2 people can have a conference call with
an outside party. The following 2
methods are available:
– Another person presses {C} or {s}
while one person is talking with an
outside party ("Call share", page 14).
– One person pages another person
during an outside call as follows
(KX-TG7220).
Advertisement
Table of Contents
