Table of Contents
Advertisement
Setting the repeater mode
" (centre of joystick) i | i
1
#
{^}/{V}: "Other Options" i
2
#
{^}/{V}: "Repeater Mode" i
3
#
{^}/{V}: "On" or "Off" i #
4
i {ih}
Note:
L After turning repeater mode on or off,
w will flash on the handset
momentarily. This is normal. The
handset can be used once w stops
flashing.
Intercom between
handsets
Intercom calls can be made between
handsets in the same radio cell.
Example: When handset 1 calls
handset 2
1
Handset 1:
{INT} i Press {2} (desired
handset number).
2
Handset 2:
{C}
3
When finished talking, press
{ih}.
Transferring calls
between handsets,
conference calls
Outside calls can be transferred
between 2 people in the same radio cell.
Multi-unit Operation
2 people in the same radio cell can have
a conference call with an outside party.
Example: When handset 1 transfers a
call to handset 2
1
Handset 1:
During an outside call, press {INT}.
i Press {2} (desired handset
number).
L The outside call will be put on
hold.
L If there is no answer, press {INT}
to return to the outside call.
2
Handset 2:
{C}
L Handset 2 can talk with handset
1.
3
Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
Transferring a call without speaking
to the other handset user
During an outside call, press {INT}.
1
i Press the desired handset
number.
L k flashes to indicate the outside
call is on hold.
{ih}
2
L The outside call rings at the other
handset.
Note:
L If the other handset user does not
answer the call within 1 minute, the
call will ring at your handset again.
31
Advertisement
Table of Contents
