Table of Contents
Advertisement
TG7200-7220TW(e-e).book Page 13 Wednesday, April 25, 2007 4:49 PM
Making calls
1
Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}.
2
{C}
3
When finished talking, press {ih}
or place the handset on the base
unit or charger.
Speakerphone
1
During a conversation, press {s} to
turn on the speakerphone.
L Speak alternately with the caller.
2
When finished talking, press
{ih}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} while on a call.
Making a call using the redial
list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
{R}
2
{^}/{V}: Select the desired number.
3
{C}
Erasing numbers in the redial list
1
{R}
2
{^}/{V}: Select the desired number.
i {>}
3
{^}/{V}: "Erase" i {>}
Making/Answering Calls
4
{^}/{V}: "Yes" i {>} i {ih}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service.
Example: If you have to dial {0} before
dialling outside numbers manually, you
will probably need to pause after dialling
{0} until you hear a dial tone.
1
{0} i {R}
2
Dial the phone number. i {C}
Note:
L A 3 second pause is inserted each
time {R} is pressed. Repeat as
needed to create longer pauses.
Answering calls
1
Lift the handset and press {C} or
{s} when the unit rings.
L You can also answer the call by
pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key
answer feature)
2
When finished talking, press {ih}
or place the handset on the base
unit or charger.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit or charger. You
do not need to press {C}. To turn this
feature on, see page 17.
Adjusting the handset ringer volume
when receiving a call
Press {^} or {V}.
Handset locator
Using this feature, you can locate the
handset if it has been misplaced.
13
Advertisement
Table of Contents
