Deleting The Escape Point - Brother PD-3000 Instruction Manual

14. Input the number of stitches to be deleted, and
then press .
In the example, 1 is the first stitch.
The current machine needle is at the first stitch.
Press and then the needle moves from the
sewing start point to B.

Deleting the escape point

The following describes how to delete the escape point A.
1. Carry out step 1 of "Procedure for modifying
program".
2. Select with
.
3. Press , and then press
The work clamp moves to the escape point.
4. Press .
5. Select with
.
15. Press
16. Carry out steps 3 to 5 of "Procedure for
6. Select
, and then press
7. Input the number of stitches to be deleted, and
.
, and then press
8. Press
9. Carry out steps 3 to 5 of "Procedure for
PD-3000
CHAPTER 3 PROGRAMMING WITH ICONS
three times.
modifying program".
with
.
then press .
In the example, 1 is the first stitch.
The current machine needle is at the first stitch.
Press and then the needle moves from the
sewing start point to 1.
three times.
modifying program".
, and then press
55