Creating An Arc; Creating A Semicircle - Brother PD-3000 Instruction Manual

CHAPTER 3 PROGRAMMING WITH ICONS

Creating an arc

1. Select , and then press
2. Input the stitch length, and then press
Stitch length

Creating a semicircle

The following two options are available for creating a semicircle.
Specifying a diameter to creating a clockwise semicircle
Specifying a diameter to create counterclockwise semicircle
1. Select , and then press
64
3. Move the needle to the second point with
.
4. Move the needle to the third point with
.
2. Select the method of creating a semicircle and
input the stitch length. Press
.
3. Move the needle to the end point with
PD-3000
. Press .
. Press .
Stitch length
. Press .
.