Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 154

Network Egress QoS Policy Forwarding Class Commands
lsp-exp-in-profile
Syntax lsp-exp-in-profile lsp-exp-value
no lsp-exp-in-profile
Context config>qos>network policy-id>egress>fc fc-name
Description
This command specifies the in-profile LSP EXP value for the forwarding class. The EXP value
will be used for all LSP labeled packets requiring marking the egress on this forwarding class
queue that are in-profile.
When multiple EXP values are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default in-profile EXP setting.
Default
Policy-id 2:
Policy-id 3 — 65535:
Parameters
lsp-exp-value — The 3-bit LSP EXP bit value, expressed as a decimal integer.
Default
Values
lsp-exp-out-profile
Syntax lsp-exp-out-profile lsp-exp-value
no lsp-exp-out-profile
Context config>qos>network policy-id>egress>fc fc-name
Description This command specifies the out-of-profile LSP EXP value for the forwarding class. The EXP
value will be used for all LSP labeled packets requiring marking the egress on this forwarding
class queue that are out-of-profile.
When multiple EXP values are associated with the forwarding class at network egress, the last
name entered will overwrite the previous value.
The no form of this command reverts to the factory default out-of-profile EXP setting.
Default
Policy-id 2:
Policy-id 3 — 65535:
Page 154 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Factory setting
Policy-id setting
none
0 — 7
Factory setting
Policy-id setting