1115
~
a
Add New Hardware Wizard or New Hardware Found (Windows 2000)
Wizard displays when the camera is connected to the computer with an
interface cable.
C
to
camera
the
computer. Next, read Start
by
Checking This on the prevIous page and resolve
the problem.
Images won't download into a TWAIN-compliant program (Camera and
cOlnputE~r
connected via interface cable (Windows 2000, Windows 98 SE».
C
Camera Control
to
it.
c:;:;}
Cannot download images or shoot remotely. (For cameras connected to
go'
the computer via an interface cable: only cameras supporting Hi-Speed
USB
2.0).
I'""\l'"nhlo.rn
may
transmission
following the procedures below.
Solution:
Hold the
MENU
button on the camera down and press the
~IN"
(Pri nt/Share)
button and
FUNC.lSET
button simultaneously. In the displayed screen, select
[B] and press the
FUNC.lSET
button.
c:;:;}a
Camera not detected, Events dialog won't display or images will not
(/ download to the computer (when camera is connected to the computer
via an interface cable).
Cause 1:
There is a problem with one of the items in the Start
by
Checking This
section (p. 114).
Solution:
Resolve the problem.
Cause 2:
The USB
is not installed (Windows only).
Solution:
Install it with the procedures in Installing the Software and USB Driver (p. 13).
Cause 3:
The USB driver is not correctly installed (Windows only).
Solution:
Uninstall the driver (p. 110) before reinstalling it with the procedures in
Installing the Software and USB Driver (p. 13).