Canon PoverShot SD430 User Manual page 258

861
Wireless Network Settings for the Computer and Camera
3
After you have selected a target device,select
[Connect].
The name registered for the target device in Step
11 (p. 81,83) in Registering the Target Device
with the Camera will appear in the [Target Device]
category.
4
Press the
~1tV
button (or FUNC.lSET button).
The wireless lamp and
~1tV
button will blink
while the two devices connect.
The LCD monitor will display an indicator that
shows the connection status.
When the camera connects to the computer, the
wireless lamp will stop blinking and light steadily.
An antenna showing the signal strength will
appear in the LCD monitor. (0-3 bars)
• • •_
~iN'
Button
1
_ .
FUNC.lSET
Button
In
Playback
Mode
~
• Unless you change the target device, you can connect later simply by pressing
L...jJ
the
~1tV
button in.Step 2 for one second.
• II
If an error message displays on the camera's LCD monitor, see the
Connection Difficulty topic in the Wireless Connection Troubleshooting
section (p. 100).