Installing The Software And Usb Driver - Canon PoverShot SD430 User Manual

This chapter explains the basic procedures for installing the software and connecting the
camera to a computer. Read this material before you connect the camera to the computer.
Installing the Software and USB Driver
Start by installing the software from the Canon Digital Camera Solution Disk.
See ArcSoft PhotoStudio (p. 107) for details on how to install ArcSoft
PhotoStudio.
- Your camera and computer
- Canon Digital Camera Solution Disk
-Interface cable supplied with the camera
1IIIull.liB. II.B.ellllel
I
Confirm that the camera is NOT connected to
the computer.
If it is, disconnect the cable. The software cannot
be properly installed if the camera is connected to
the computer at the start.
2
Close any programs that are running.