Canon PoverShot SD430 User Manual page 275

IIConnection failed 5
11
Message
Cause 1
Connection confirmation signal processing failed.
Solution 1:
Enable the UPnPTM service in your firewall settings.
See Enabling the UPnprM Service (p. 105) for details.
Solution 2:
Change the firewall settings to allow the program for wireless connections
(CALWLESS.exe) to communicate with the carnera through the firewall. See
Enabling Communication for the Wireless Connection Program
(CALWLESS.exe) (p. 105) for details.
Cause 2
Unable to connect within the time limit owing to a problem with the
wireless network environment or the computer (3D-second timeout).
Solution 1:
Change the camera's orientation.
Solution 2:
Bring the camera near the wireless LAN router or other access point device.
Solution 3:
Change the channel of the wireless LAN router or other access point device.
Solution 4:
Confirm that the target device's (computer1s) wireless networking function is
operating correctly.
Solution 5:
Enable the UPnPTM service in your firewall settings.
See Enabling the UPnprM Service (p. 105) for details.
IIConnection failed 6 11 Message
Cause
IP address duplicated.
Solution 1:
Power the camera off and on again and try to reconnect.
Solution 2:
If a fixed IP address has been assigned, change the assignment.
See How to Display the IP Addresses Configuration Screen (p. 100).
1103