Setting Channel Alert; Setting Ctcss/Dcs (Conventional Channels Only) - Uniden BC246T Owner's Manual

Setting Channel Alert

program system
Menu
Select the system
Edit Group
E
Select the group
Edit Channel
E
Select the channel
Set Alert
E
This setting controls whether the scanner will alert you
when the channel becomes active. Select your setting,
then press E.
On - the scanner beeps when the channel becomes active.
Off - no alert sounds.
Notes:
• Channel alert does not work if key beep is turned off.
• The default setting for channel alert is Off.
Setting CTCSS/DCS
(Conventional Channels Only)
program system
Menu
Select the system
Edit Group
E
Select the group
Edit Channel
E
Select the channel
Set CTCSS/DCS
This setting controls how a subaudible CTCSS or DCS is
used for the channel. Select your setting, then press E.
Off - any signal opens squelch.
Search - the scanner searches for and displays any
CTCSS or DCS tone that accompanies the transmission.
Programming/Editing Optional Settings
E
E
E
E
E
E
E
E
E
75