Connecting An Earphone/Headphone; Connecting An Extension Speaker; Attaching The Belt Clip - Uniden BC246T Owner's Manual

Connecting an Earphone/Headphone

For private listening, you can plug a
mini-plug earphone or headphones (not supplied) into the
headphone jack on top of your scanner.
This automatically disconnects the internal speaker.
See "Earphone Warning" at the front of the manual for
important information about using an earphone/
headphone.

Connecting an Extension Speaker

In a noisy area, an optional amplified extension speaker,
positioned in the right place, might provide more
comfortable listening. Plug the speaker cable's
(3.5-mm) mini-plug into your scanner's jack.
WARNING!
Never connect anything other than an earphone or the
recommended amplified extension speaker to the
scanner's headphone jack. This might damage the
scanner.

Attaching the Belt Clip

To make your scanner easier to carry when you are on
the go, use the supplied belt clip. Use a Phillips
screwdriver and the supplied screws to attach the clip to
the scanner.
1
/ -inch (3.5 mm)
8
Setting Up Your Scanner
34
1
/ -inch
8