Yamaha YZ125N1 Service Manual page 96

CARBURETOR AND REED VALVE
4-9
EC466030
HANDLING NOTE
cC
Do not disassemble the venturi block 1 1
and main nozzle 2 2 because it will cause a
drop in carburetor performance.
EC463000
REMOVAL POINTS
EC463110
Throttle valve
1. Remove:
9Throttle valve 1
9Ring 2
9Spring (throttle valve) 3
9Mixing chamber top 4
9Throttle cable 5
NOTE:
While compressing the spring (throttle valve),
disconnect the throttle cable.
EC464000
INSPECTION
EC464140
Carburetor
1. Inspect:
9Carburetor body
Contamination Clean.
cC
When cleaning the main air passage
not blow air at the filter side because it will
clog the passage with mud or sand.
NOTE:
9Use a petroleum based solvent for cleaning.
Blow out all passages and jets with com-
pressed air.
9Never use a wire.
9When cleaning the main air passage, blow air
through it while covering the nozzle with a
clean rag.
ENG
a a , do