a
EC564101
Bearing and ball race
1. Wash the bearings and ball races with a sol-
2. Inspect:
EC565000
ASSEMBLY AND INSTALLATION
EC565113
Under bracket
1. Install:
NOTE:
Apply the lithium soap base grease on the dust
seal lip and bearing inner circumference.
2. Install:
NOTE:
Apply the lithium soap base grease on the bear-
ing and ball race cover lip.
3. Install:
NOTE:
Apply the lithium soap base grease on the bear-
ing and the portion a of the steering shaft.
1
5-49
CHAS
STEERING
vent.
9Bearing 1
9Ball race
Pitting/Damage
Replace bearings and
ball races as a set.
Install the bearing in the ball races. Spin the
bearings by hand. If the bearings hang up or
are not smooth in their operation in the ball
races, replace bearings and ball races as a
set.
9Bearing (lower) 1
9Ball race
9Bearing (upper) 1
9Ball race cover 2
9Under bracket 1