Table of Contents
Advertisement
Dot Printer MZ-80P6
To connect MZ-80P6 to MZ-80B, MZ-80A or MZ-80K (hereinafter called the computer), the printer
proper, signal cable (option), and interface card (option) are required.
CD
Control panel
Holds on-line switch, paper feed switches and indicators.
®
Manual feed knob
®
Power switch
@
Appliance inlet
Connect the power cord connector of an accessory here.
o
FG (Frame ground) terminal
Terminal for connecting braided wire.
®
Signal terminal (I/O PORT 1)
Connect the signal cable connector
here.
r:=[)
Assistant gu ide
Attach to the main body for smooth feed of printing
paper.
CID
Braided wire
Connect to the FG terminals of the computer and MZ-80P6.
®
Special cartridge ribbon
®
Signal cable (option)
Connect the printer I/O card and the MZ-80P6 with this
cable.
The signal cable to be used differs depending on the
computer to be connected.
MZ-8BP5C:
for MZ-80B or MZ-80A
MZ-8KP5C:
for MZ-80K
(jJ)
Screws
Use these screws to fasten the connectors of the signal
cable.
@
I/O card (option)
I nterface card for connecting the computer and printer.
The I/O card to be used differs depending on the computer
to be connected
.
MZ-8BP51:
for MZ-80B or MZ-80A
MZ-8 KP41:
for MZ-80K
(Front of
main'
body)
~
JI;
~
(Back of ;ain body)
11
It
I1
1\
~
.~------~------~
.
..
-
.
....,
'
,- 1 0
\
3
Advertisement
Table of Contents
