Table of Contents
Advertisement
Chapter 2
2-6
DX-408/DX-408i Digital Key System Installation
2. Fixing the DX-408/DX-408i digital key system to the wall
The DX-408/DX-408i digital key system is housed in a plastic cabinet enabling direct
installation on a wall. The following describes how to install the system on the wall.
1. Cut out the mounting paper found in the Appendix D of this manual. Carefully cut along
the dotted line taking care not to tear the paper.
2. Place the mounting paper to the wall and mark the hole locations on the wall for the screws.
3. If the wall is built of concrete, insert a bushing into the hole first and then insert the screw
into the wall anchor. Fasten the screw securely.
Hole
Wall anchor
Screw
Advertisement
Table of Contents
