Logging Out Of The Web Configurator; Help - ZyXEL Communications GS2200-24 User Manual

Chapter 4 The Web Configurator
Disconnect and reconnect the Switch's power to begin a session. When you
2
reconnect the Switch's power, you will see the initial screen.
When you see the message "Press any key to enter Debug Mode within 3
3
seconds ..." press any key to enter debug mode.
Type atlc after the "Enter Debug Mode" message.
4
Wait for the "Starting XMODEM upload" message before activating XMODEM
5
upload on your terminal.
After a configuration file upload, type atgo to restart the Switch.
6
The Switch is now reinitialized with a default configuration file including the
default password of "1234".

4.7 Logging Out of the Web Configurator

Click Logout in a screen to exit the web configurator. You have to log in with your
password again after you log out. This is recommended after you finish a
management session for security reasons.
Figure 16 Web Configurator: Logout Screen

4.8 Help

The web configurator's online help has descriptions of individual screens and some
supplementary information.
Click the Help link from a web configurator screen to view an online help
description of that screen.
50
GS2200-24 User's Guide