Lifescan Ultra Owner's Booklet page 66

MESSAGE
58
WHAT IT MEANS
Flashing time means the
meter has lost power and
entered the setting mode.
The meter has detected that
the temperature is below the
system operating range. Do
Not perform a test until the
meter and test strips reach a
temperature within the
operating range of
43–111°F (6–44°C).
The meter has detected that
the temperature is above
the system operating range.
Do Not perform a test until
the meter and test strips
reach a temperature within
the operating range of
43–111°F (6–44°C).
ACTION
You must reset the time, time
format and date. See Meter
Set-up, pages 40–45. Confirm
that your meter is set in mg/dL.
If not, call LifeScan
Customer Service at
1 800 227-8862.
Note to users of OneTouch
Diabetes Management
Software: Do Not transfer data
from a meter that has experi-
enced a loss of power. Call
LifeScan Customer Service
at 1 800 227-8862 for more
information.
Repeat the test after the meter
and test strips have reached a
temperature within the oper-
ating range.
Repeat the test after the meter
and test strips have reached a
temperature within the oper-
ating range.
®