Lifescan Ultra Owner's Booklet page 38

Hold the blood
drop to the top
edge of the test
strip until the
confirmation
window is full
before the
meter begins
to count down. If the confirmation window does not fill completely
before the meter begins to count down, Do Not add more blood to the
test strip; discard the test strip and retest. If you have trouble filling the test
strip, call LifeScan Customer Service at 1 800 227-8862 for
assistance.
If the confirmation window is not full, you
may get an Æ
an inaccurate test result.
Note: If you do not apply a blood sample within two minutes after the
symbol appears, the meter will turn itself off. You must remove the
test strip and insert it back into the meter to restart the test procedure.
30
message (see page 57) or
Good Sample
Too Small
Sample