Using The Meter For The First Time - Lifescan SureStep blood glucose monitoring system Owner's Booklet

RECALLING RESULTS FROM METER MEMORY
The SURESTEP
®
Meter is pre-set to automatically
display your last test result when
the meter is turned on. You can also
review your last result immediately
after a new test is completed. The
meter stores your 10 most recent
blood glucose or control solution
test results in its memory. When
the memory is full, the oldest result
is dropped as the newest is added.
Blood Glucose Using the Meter
for the First Time
The first time you turn on your
meter the following symbol will
appear briefly, showing that there
is no test result in the memory:
This symbol will also appear after
turning on your meter when your
previous test ended in an error and
the meter did not display a result.
42