Lifescan Pocket Scan Blood Glucose Monitor System Owner's Booklet page 32

Note: You can enter the memory mode from the test mode. After com-
pleting a blood glucose or control solution test and while the test result
is still on the display, press the M button. This will put the meter into the
memory mode.
(Example)
22
Recall Test Results.
After three seconds, the 14-day average
will be replaced by the most recent test
result with date and time. Press the C but-
ton once and the next most recent test
result will appear. Each time you press and
release the C button, the meter will recall
up to your last 150 test results in order.
When the memory is full, the oldest result
is dropped as the newest is added. To
move through the tests in memory more
quickly, press and hold the C button.
Control solution test results will appear on
the display with "ctl mem."
STEP 2