Lifescan InDuo blood glucose meter User Manual page 40

36
TESTING YOUR BLOOD GLUCOSE LEVELS
Cleaning the OneTouch
• Clean the sampler with soap and water as needed.
To disinfect the sampler, prepare a disinfectant
solution of 1 part household bleach to 10 parts
water. Dampen a cloth in this solution and wipe
the sampler thoroughly. Soak only the cap for at
least 30 minutes in the disinfectant solution. Do
not soak the sampler in liquid. Rinse the sampler
and cap with water and dry thoroughly.
Performing a blood glucose test on your
blood sample
Insert the OneTouch
• Insert the OneTouch
end-first and facing up, into the test port. Push the
OneTouch ® Ultra test strip in firmly until it will
go no further.
• The InDuo meter will turn on automatically. All
TM
segments on the meter display will appear briefly.
Then the code number is displayed, followed by
the apply symbol R with the units of
measurement (Á or fi). Verify that the
calibration code and units of measurement are set
® UltraSoft TM blood sampler
® Ultra test strip
® Ultra test strip, contact bars