Life Fitness T30/T35 User Manual page 10

Life fitness treadmill user manual t30/t35
Table of Contents

Advertisement

G
I
ROUNDING
NSTRUCTIONS
This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides
a path of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the equip-
ment. Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and a grounding
plug. The plug must be inserted into an outlet that has been properly installed and grounded in accordance with all local
codes and ordinances.
A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North America. If a properly
grounded, 12 AMP outlet is not available, a qualified electrician must install one.
DANGER: A risk of electrical shock may result from improper connection of the equipment-grounding conductor. Check
with a qualified electrician if in doubt about proper grounding technique. DO NOT modify the plug provided with the prod-
uct. If it will not fit an electrical outlet, have a proper outlet installed by a qualified electrician.
DANGER: Tout branchement incorrect du conducteur de mise à la terre de l'appareil peut causer un risque de
décharge électrique. Consulter un électricien qualifié en cas de doute sur la technique de mise à la masse. NE PAS
modifier la fiche de l'appareil. Si elle ne s'adapte pas sur une prise électrique, faire installer une prise correcte par un
électricien qualifié.
H
T
S
OW
O
TABILIZE
After placing the unit where it will be used, check its stability. If there is even a
slight rocking motion or the unit is not stable, determine which stabilizing leg is not
resting on the floor. To adjust, loosen the JAM NUT (A) and turn the STABILIZING
LEG (B) until the rocking motion ceases and both stabilizing legs rest firmly on the
floor. Retighten the JAM NUT.
NOTE: It is extremely important that the stabilizing leg be correctly adjusted for
proper operation. An unbalanced unit may cause the striding belt misalignment.
T
L
F
T
HE
IFE
ITNESS
READMILL
A
B
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T30T35

Table of Contents