Engaging And Disengaging The Chain Brake; Mixing Fuel And Refueling The Chainsaw - Stihl MS 462 C-M R Instruction Manual

Hide thumbs Also See for MS 462 C-M R:
Table of Contents

Advertisement

7 Engaging and Disengaging the Chain Brake

► If the oil tank cap cannot be pulled upwards
and off: Fold down the grip on the oil tank cap.
The oil tank is closed.
If the oil tank cap can be pulled upwards and off,
perform the following steps:
► Place the oil tank cap in the filler opening – in
any position.
► Press the cap down and rotate it clockwise as
far as stop.
► Press the cap down and rotate it counterclock‐
wise until mark (1) points to mark (2).
► Now try again to close the oil tank.
► If the oil tank still cannot be closed properly:
Do not use the chainsaw and contact a STIHL
dealer for assistance.
The chainsaw is not in a safe condition.
6.5
Mounting the Spiked Bumper
3
2
1
► Insert the screws (2) through the holes in the
chain sprocket cover (3) as far as stop.
► Push the bumper strips (1) into the recess in
the chain sprocket cover (3).
► Fit the washers (7).
► Fit the cover (6) in position.
► Fit the spiked bumper (5).
► Fit and tighten down the nuts (4) firmly.
The spiked bumper (5) must not be removed.
7
Engaging and Disengaging
the Chain Brake
7.1
Engaging the Chain Brake
The saw is equipped with a chain brake.
0458-787-0121-B. VA0.M20.
6
5
7
4
The chain brake is activated by the inertia of the
front hand guard if the kickback force is high
enough or can be engaged by the operator.
1
► Push the hand guard away from the front han‐
dle with your left hand.
The hand guard engages with an audible click.
2
The chain brake is engaged.
7.2
Disengaging the Chain Brake
► Pull the hand guard toward the front handle
with your left hand.
The hand guard engages with an audible click.
2
The chain brake is disengaged.
8
Mixing Fuel and Refueling
the Chainsaw
8.1
Mixing Fuel
This chainsaw requires a fuel mixture of gasoline
and two-stroke engine oil in a ratio of 50:1.
STIHL recommends you use STIHL MotoMix.
If you mix the fuel yourself, use only STIHL two-
stroke engine oil or another high-performance
engine oil in accordance with JASO FB, JASO
FC, JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-
EGD.
STIHL specifies STIHL HP Ultra two-stroke
engine oil or an equivalent high-performance
engine oil in order to maintain emission limits
throughout the machine's service life.
► Make sure that the octane number of the gas‐
oline is at least 90 RON and the ethanol con‐
tent is not more than 10%.
English
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents