Clearances - Empire Comfort Systems DVD32FP3(0,1,2,3)(N,P)-2 Installation Instructions And Owner's Manual

clearance to combustibles
Back
Side
Floor
Top Stand-off
Top Framing Edge
SEE MANTLE CHART FOR
MAXIMUM MANTLE DEPTH
SEE MANTLE CHART
FOR MINIMUM HEIGHT
OF MANTLE ABOVE UNIT
FINISHED WALL
(COMBUSTIBLE)
NON-COMBUSTIBLE
"
FIRST 3 (SEE MAGNIFIED
VIEW)
TOP FRAMING
LEDGE
GLASS FRONT
combustible Material
No greeting cards, stockings or ornamentation of any type should
be placed on or attached to the fireplace. The flow of heat can
ignite combustibles.
Note: When using Empire EMBF, UMC, and UMF Series Full
Mantels with DVD32 and DVD36 Series Fireplaces, combustible
clearance may be reduced to 1" clearance from top edge of fire-
place face.
26985-0-0110

clearances

0" (0 mm)
0" (0 mm)
0" (0 mm)
0" (0 mm)
3" (76 mm)
2" x 4" HEADER
STAND OFF
3" (76 mm) HEIGHT
ABOVE TOP OF
FIREPLACE
3"
NAILING
FLANGES
Figure 2
Mantel chart (Figure 3)
12" (305mm)
10" (254mm)
MANTEL
8"
15"
6"
(381mm)
13 3/4"
11"
9"
8"
7"
6"
5"
TOP EDGE OF FIREPLACE
clearances (Figure 4)
Clearance from top front edge of fireplace to ceiling is 36"
Clearance from side of fireplace to adjacent sidewall is 6".
COMBUSTIBLE TRIM AND MANTELS
ALLOWED IN SHADED AREA
4 ½"
3 3/4"
3"
2 1/4"
1 ½"
3/4"
4"
3"
Figure 3
Figure 4
Page 9