Auto Changeover; Auxiliary Heat (Heat Pump Systems Only); Backlighting; Dehumidify - Bryant Preferred Owner's Manual

Common Terms and Where to Find Them
Auto changeover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 36
This feature automatically switches your system from heating to
cooling – or from cooling to heating – whenever necessary when
in auto mode only (heat/cool).
Auxiliary heat (heat pump and Hybrid Heat systems only) . . .page 25
Most heat pump systems can't heat a home sufficiently when it gets
very cold outside so they use a supplemental heating source called
auxiliary heat. The system knows when to use this help and does so
automatically. If it's using auxiliary heat, the display will show aux heat
on when you press the mode button. You have no control over the
auxiliary heat function.
Backlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 31
Backlighting illuminates your display. The backlight is on constantly at
a dim level that brightens when you push a button.
Dehumidify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 21
When your heating and cooling system is used to dehumidify the
air and the thermostat is set up to dehumidify, the thermostat will
instruct it to remove moisture from the air as necessary when the
air conditioning is on.
39