Setting The Away Temperature - Bryant Preferred Owner's Manual

Operating the Thermostat

Setting the away temperature

1. Press the away button located under the display in
the center. You will see a triangle icon ( ) above the
away button.
2. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the
door.
3. To change the heating settings, press the mode button
until you see the word heat on the screen on the left.
4. Press the up or down button on the right until you
reach the desired temperature setting. The arrow
pointing to the away button will disappear.
5. Press and hold the away button for about three seconds.
The away arrow will be displayed, indicating that the thermostat has
saved your settings.
6. To change the cooling temperature setting, press the mode button
repeatedly until you see the word cool on the screen on the right.
16