Quick Start; Setting Or Changing The Temperatures For Heating And Cooling - Bryant Preferred Owner's Manual

Quick Start

Setting or changing the temperatures for heating and cooling

Your thermostat is installed with pre-set heating and cooling temperature
settings. You can use these or change them so your home is as warm
or as cool as you would like it to be. These steps will hold the temperature
where you set it until you make another change.
1. Open the door. You will see the word heat or cool on the screen
next to the pre-set temperature, depending on the mode your
system is in. (If the thermostat is in "auto" mode, you will see both
the heating and cooling set points. If it's the first time you've used
the thermostat, the mode will say heat.)
2. To change the displayed temperature, press the up or
down button located on the right side until you reach
the desired setting.
3. To change the other temperature setting, press the
mode button on the left. The screen will display the
word cool or heat and the pre-set temperature.
4. Press the up or down button to change the displayed
setting. Stop on the desired setting.
5. Close the door.
10