Advertisement
PAge heAder.....
oPErAtIng yoUr nEW APPLIAnCE
To start, press and release Steam Lever
downwards to activate Auto Steam function.
Milk texturing will stop automatically when
the selected milk temperature is reached.
After removing steam wand from jug the
Steam Wand will automatically purge when
returned to the downward (home) position.
notE
Minimum level in the milk jug is
covering steam tip up to white ring.
mAnUAL StEAm modE
Insert steam wand into milk jug and lift
Steam Lever to activate manual steam mode.
Lower Steam Lever to centre OFF position
to stop steam flow.
notE
Milk texture and auto shut off are
disabled during manual steam mode.
CAUTION: BURN HAZARD
Pressurised steam can still be released,
even after machine has been switched off.
Children must always be supervised.
notE
If machine is run continuously for
30 minutes, allow machine to cool for
3 minutes before each use.
AUtomAtIC Long BLACK
Select required CUP SIzE and STRENGTH
by turning Long Black dial left or right.
To start extraction, press the Long Black
button. Espresso will be extracted, followed
by the selected volume of hot water.
Hot water will stop automatically when the
selected cup volume has been reached.
17
notE
To override selected setting during the
operation press the Long Black button
during the extraction. This will stop the
flow of espresso & start the flow of hot
water. Pressing the Long Black button
during the hot water delivery will stop
the flow of hot water.
mAnUAL Long BLACK
This allows you total control over the
Long Black process: pre-infusion duration,
espresso volume & hot water volume.
Press and hold Long Black button, to
activate pre-infusion. Release Long Black
button to commence espresso.
LONG BLACK
LONG BLACK
LONG BLACK
LONG BLACK
LONG BLACK
LONG BLACK
Press the Long Black button to stop
espresso pour and commence hot
water pour.
LONG BLACK
LONG BLACK
LONG BLACK
Press the Long Black button again to
stop the pour of Hot Water.
LONG BLACK
LONG BLACK
LONG BLACK
PAge heAder.....
oPErAtIng yoUr nEW APPLIAnCE
Hot WAtEr
To stop & start Hot Water, press the
Hot Water button.
HOT WATER
notE
You cannot run hot water and extract
espresso at the same time.
LCd ProgrAmmIng fUnCtIonS
To enter program mode press MENU|EXIT
button. Rotate SELECT dial to select
required function.
Program mode allows you to program
your preferred setting for the following
functions:
•
Shot Volume
•
Shot Temperature
•
Start Clean Cycle
•
Set Clock
•
Auto Start
•
Auto Off
•
Tamp Set
•
Pre-Infuse
•
Long Black Adjust
MENU
EXIT
To Exit program mode press MENU|EXIT.
SHot VoLUmE
1 CUP Volume Programming
Grind, Dose and Tamp the portafilter.
Insert the portafilter into the group
head. While 1 cup is displayed press the
SELECT dial to start espresso extraction,
when required espresso volume has been
extracted, press SELECT dial to stop
extraction. The machine will sound a long
beep to show volume has been saved.
SELECT
SELECT
SELECT
TEMP TEXTURE
TEMP TEXTURE
TEMP TEXTURE
18
Advertisement
