Adjusting The Brake Lever Free Play - Yamaha WR25RB Owner's Manual

2
1
1. Clutch lever free play
2. Locknut (clutch lever)
3. Clutch lever free play adjusting bolt
4. Rubber cover
TIP
If the specified clutch lever free play
could be obtained as described above,
skip steps 4–7.
4. Fully turn the adjusting bolt in di-
rection (a) to loosen the clutch ca-
ble.
5. Slide the rubber cover back further
down the clutch cable, and then
loosen the locknut.
6. To increase the clutch lever free
play, turn the clutch lever free play
adjusting nut in direction (a). To
decrease the clutch lever free play,
PERIODIC MAINTENANCE AND ADJUSTMENT
turn the adjusting nut in direction
(b).
3 4
(a)
(b)
1. Locknut (clutch cable)
2. Clutch lever free play adjusting nut (clutch
cable)
3. Rubber cover
7. Tighten the locknut at the clutch
cable, and then slide the rubber
cover to its original position.
8. Tighten the locknut at the clutch le-
ver, and then slide the rubber cov-
er to its original position.
Adjusting the brake lever free
play
2 3 The brake lever free play should mea-
sure 5.0–8.0 mm (0.20–0.31 in) as
(a)
shown. Periodically check the brake le-
ver free play and, if necessary, adjust it
as follows.
(b)
1. Slide the rubber cover back at the
1
2. Loosen the locknut.
3. To increase the brake lever free
7-25
brake lever.
play, turn the brake lever free play
adjusting screw in direction (a). To
decrease the brake lever free play,
turn the adjusting screw in direc-
tion (b).
EAU48442
2
3
4
5
6
7
8
9