Yamaha WR25RB Owner's Manual page 65

2
1
1. Screw
2. Air filter case cover
3. Unhook the holding clip, and then
pull the air filter element out.
1
1. Holding clip
2. Air filter element
4. Remove the sponge material from
the air filter element frame, clean it
PERIODIC MAINTENANCE AND ADJUSTMENT
with solvent, and then squeeze the
remaining solvent out. WARNING!
Use only a dedicated parts
cleaning solvent. To avoid the
risk of fire or explosion, do not
use gasoline or solvents with a
low flash point.
To avoid damaging the foam
material, handle it gently and
carefully, and do not twist or
wring it.
[ECA10511]
1
2
2
1. Sponge material
2. Air filter element frame
NOTICE:
[EWA10431]
5. Apply oil of the recommended type
TIP
The sponge material should be wet but
not dripping.
Recommended oil:
6. Pull the sponge material over the
7. Insert the air filter element into the
7-19
to the entire surface of the sponge
material, and then squeeze the ex-
cess oil out.
Yamaha foam air filter oil or other
quality foam air filter oil
air filter element frame.
air filter case. NOTICE: Make sure
that the air filter element is prop-
erly seated in the air filter case.
The engine should never be op-
2
3
4
5
6
7
8
9