Intended Use; Air Supply And Operation - Ryobi RA-NBS1832-S Operator's Manual

Air inlet size
Air hose size
Air consumption
Working pressure
range
Exhaust
Tool weight
(no nails)
NOISE ANd VIBRAtION
Noise according to EN 12549:1999 and EN ISO 4871
A-weighted sound
pressure level
Sound power level
A-weighted sound
pressure level(at
working station)
C-weighted sound
pressure level
Vibration according to ISO 8662-11:1999
Vibration in the
handle

INtENdEd USE

The tool can be used for the purposes listed below:
■ Decorative finish and trim (interior)
■ Window architraves and moulding
■ Window glazing bead
■ Skirting boards
■ Panelling and lining
■ Cabinetry
■ Shelving
■ Furniture assembly
■ Upholstery
■ Picture framing

AIR SUpply ANd OpERAtION

■ Ensure air valve (or trigger) is in the "off" position
before connecting to the air supply.
■ Required air pressure range of 4.8 - 8.3 bar (70 - 120
psi), and an airflow according to specifications.
■ Disconnect the product from the compressed air supply
before changing accessories or making adjustments.
■ Connect the product to the air hose.
6.35 mm (1/4")
9.52 mm (3/8")
0.76 L/cycle at 6.9 bar (100 psi)
4.8 - 8.3 bar (70 - 120 psi)
Rear adjustable (360°)
1.47 kg
L PA =80.9 dB(A), K PA =2.5 dB
L WA =93.9 dB(A), K WA =2.5 dB
L PA =82.0 dB(A), K PA =2.5 dB
L PC,peak =82.4 dB(A),
K PC,peak =2.5 dB
ah,W=14.7 m/s 2 ,
K=1.5 m/s 2
■ Push the tool against the work surface and squeeze
the trigger to drive a fastener.
■ Do not use any additional force upon the product.
Ensure the air supply is clean and does not exceed
8.3 bar (120 psi) while operating the product. Too
high an air pressure and unclean air will shorten the
product's life due to excessive wear, and may be
dangerous causing damage and/or personal injury.
ASSEMBly
UNpAckINg
This product has been shipped completely assembled.
■ Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
could result in serious personal injury.
■ Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
packing list
– Brad nailer/Stapler
– Wrench kit
– Air tool oil
– Canvas bag
– C1 brad nails 20 mm x 500
– Narrow crown staples 22 mm x 500
– Operator's manual
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
4
WARNINg
WARNINg
WARNINg