Table of Contents
Advertisement
Folder and track generation rules
When first recording the analog audio
to an USB device, a "MUSIC" folder is
created directly below the "ROOT. "
Folders and tracks are generated within
this "MUSIC" folder as follows:
When recording from the tape
deck
Folder name: "TAPE001"*
Track name: "TRACK001"*
When recording from the tuner
Folder name: "FM001"* or "AM001"*
Track name: "TRACK001"*
When recording from the DMPORT
Folder name: "DMPORT001"*
Track name: "TRACK001"*
When recording from the VIDEO/
SAT AUDIO IN L/R jacks
Folder name: "VIDEO001"* or
"SAT001"*
Track name: "TRACK001"*
* Folder and track numbers are assigned
serially thereafter.
8
GB
Notes
Do not remove the USB device during
recording operation. Doing so may corrupt
the data on the USB device or damage the
USB device itself.
Do not connect the system and the USB
device through an USB hub.
Each time you press REC TO USB on
the unit during recording, the system pauses
recording for a few seconds to add a new
track mark. No sound is recorded during this
time.
The track numbers are automatically marked
when you record more than 60 minutes.
Recording stops automatically when:
you change the function.
you turn off the system.
the USB device runs out of space during
the recording.
the number of audio tracks on the USB
device reaches the limit for the number
that the system can recognize.
The sound is recorded as 128 kbps MP3
audio track.
Up to 150 audio tracks can be contained on
a single folder and up to 200 folders can be
contained on a single USB device.
The maximum number of audio tracks and
folders may vary depending on the audio
tracks and folder structure.
Hide quick links:
Advertisement
Table of Contents
