Sony MHC-GZR8D Operating Instructions Manual page 70

TEST TONE (MHC-GZR9D/GZR8D
only)
OFF: The test tone is not emitted from
the speakers.
ON: The test tone is emitted from each
speaker in sequence.
The test tone is emitted from the selected
speakers when you select "LEVEL
(FRONT)" or "LEVEL (SURROUND). "
1
Press  /  /  / 
select the desired speaker or the
level.
2
Press ENTER
3
Repeat step 1 and 2. Press  /  /  / 

repeatedly to set "TEST TONE"
to "OFF" when you have finished
adjusting the speaker level.
To return to the default setting when
1)
changing a setting, press CLEAR
before you press ENTER
note that you cannot return the setting
of "CONNECTION" to default setting.
Note that you cannot perform "SPEAKER
SETUP" when you connect headphones or
microphones to the unit.
Depending on the settings of other speakers,
2)
the subwoofer may output excessive sound.
The items that are set to "NONE" in
3)
"CONNECTION" cannot be selected. When
you perform "QUICK" setup (page 34), the
default settings are changed.
70
GB

repeatedly to

.


. However,
4) If each left and right speakers are not placed
at an equal distance from your listening
position, set the distance according to the
closest speaker.
5) The setting range changes depending on the
front speaker setting.
The items that are set to "NONE" in
6)
"CONNECTION" cannot be selected.
This setting cannot be selected when
7)
"SURROUND" is set to "NONE" in the
"CONNECTION" setting.