Sony MHC-GZR8D Operating Instructions Manual page 31

Notes
 Do not place the surround speakers on top of
a TV. This may cause distortion of the colors
1)
in the TV screen.
 Be sure to connect the both left and right
surround speakers. Otherwise, the sound
1)
will not be heard.
 Always place the subwoofer vertically,
keeping it a few centimeters away from the
wall.
2) 3)
 If the subwoofer is placed in the center
of a room, the bass could be extremely
weakened. This is due to the influence
2) 3)
of the standing wave of the room. If this
happens, move the subwoofer away from the
center of the room or eliminate the cause of
the standing wave, by placing a bookshelf
against the wall, etc.
MHC-GZR9D/GZR8D only
1)
MHC-GZR9D only
2)
For MHC-GZR8D/GZR7D, the subwoofer
3)
is an option (sold separately). Refer to the
subwoofer operating instructions for the
detailed setting method.
To install the surround speakers on
the wall (MHC-GZR9D/GZR8D only)
1
Prepare screws (not supplied) that
are suitable for the hole on the back
of each speaker. See the illustrations
below.
4 mm
more than 25 mm
2
Fasten the screws to the wall.
The screws should protrude 5.5 to
7 mm.
5.5 to 7 mm
5.3 mm
9 mm
Hole on the back of
the speaker

Continued
1
GB