Sony MHC-GZR8D Operating Instructions Manual page 132

ERASE ERROR
Erase of audio tracks or folders on the
USB device failed.
FATAL ERROR
The USB device has been disconnected
while transferring to the USB device.
FOLDER FULL
The number of folders on the USB device
has reached the maximum.
INVALID
You have pressed an invalid button.
JPEG
The playback mode is "IMAGE" and a
JPEG image file is being played back.
NO AUDIO
The connected USB device or the loaded
DATA CD/DVD does not contain audio
tracks.
NO DEVICE
No USB device is connected.
NO IMAGE
The connected USB device or the loaded
DATA CD/DVD does not contain image
files.
NO TAB
You cannot record the tape because the
tab has been removed from the tape.
NO TAPE
There is no tape in the tape deck.
NOT IN USE
You have pressed a button whose
operation is not allowed or invalid at that
time.
NOT SUPPORT
 An unsupported USB device is
connected.
 The USB device is connected to this
system through a hub.
1
GB
OFF TIME NG
The on time and off time of Play Timer or
Rec Timer is the same.
OVER CURRENT
An over current from the

was detected.
PLEASE WAIT
 The system is doing initialization
process.
 The system is readying for usage of an
USB device.
PROTECTED
The USB device is write-protected.
PUSH STOP
You have pressed the buttons whose
operation is only possible when playback
is stopped.
READING
 The system is reading information
of the disc. Some buttons are not
available.
 The system is recognizing the USB
device.
REC ERROR
Transferring did not start, stopped
partway, or otherwise could not be
performed.
TRACK FULL
The number of audio tracks on the USB
device has reached the maximum.
(USB) port