4
Set the time to start playback or
recording.
Press or
hour, then press ENTER
The minute indication flashes in the
display. Use the procedure above to
set the minute. "OFF" appears and the
hour indication flashes in the display.
5
Set the time to stop playback
or recording using the same
procedure as step 4.
6
Select the sound source or
prepare the tape or USB device.
For Play Timer:
Press or
the music source (DVD, USB, tape
or tuner) you want appears in the
display, then press ENTER
display will show the timer settings.
For Rec Timer:
The display will show the timer
settings.
When recording to a tape, perform
steps 1 through 5 of "Recording onto
a tape" (page 75).
When you record on both sides, be
sure to start from the front side. If you
start from the reverse side, recording
stops at the end of reverse side.
When recording to an USB device,
perform steps 1 and 2 of "Listening to
music of an USB device" (page 85).
10
GB
repeatedly to set the
.
repeatedly until
. The
7
Press
to turn off the
system.
Be sure to turn off the system at least
120 seconds before the preset time.
Other operations
To
Do this
Check the
1
Press TIMER MENU
setting
"TIMER SELECT"
flashes in the display.
2
Press ENTER
3
Press or
repeatedly to select
"PLAY SELECT" or
"REC SELECT, " then
press ENTER
Change the
Start from step 1.
setting
Cancel the Play
1
Press TIMER MENU
Timer or Rec
Timer
"TIMER SELECT"
flashes in the display.
2
Press ENTER
3
Press or
repeatedly to select
"TIMER OFF, " then
press ENTER
.
.
.
.
.
.