Chapter 10 - Dolphin 70E Black Ebase (Model 70E-Ehb); Overview; Unpacking The Ebase - Honeywell Dolphin 70e Black User Manual

Hide thumbs Also See for Dolphin 70e Black:
Table of Contents

Advertisement

10
Dolphin 70e Black eBase (Model 70e-EHB)

Overview

The Ethernet Base (eBase) enables a single Dolphin 70e Black computer to communicate with a host
device over an Ethernet network.
The 70e-EHB charger is designed for use with the following Dolphin models and batteries, manufactured
for Honeywell International Inc:
Dolphin Model
Dolphin 70e Black
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the eBase

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin eBase Ethernet cradle, model 70e-EHB
• One power supply (see
• One power cord
These items are needed to set up and operate the eBase. If any items are missing or anything appears
to be damaged, contact your Customer Account Representative. Keep the original packaging in case
you need to return the eBase for service or to store the eBase while not in use.
Optional Equipment
• A standard USB (Type A to B) cable is required when using the eBase for USB communication between
the terminal and a host device.
• A standard CAT-5 Ethernet network cable is required when using the eBase for communication
between the terminal and a host device over an Ethernet network.
Charging Overview
The base provides power to the intelligent battery charging system in all Dolphin terminals that senses
when a full charge has been achieved and switches to a trickle charge to maintain the full charge. The
base completes a full charge of the main battery pack installed in the terminal seated in the terminal well
in 4 hours for the standard battery or 6 hours for the extended battery. The base completes a full charge
of the battery pack in the
hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the
Battery Pack Use and Disposal
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
Battery Model No.
Battery Part No.
BAT-STANDARD-01
70e-BTSC
BAT-STANDARD-02
BAT-EXTENDED-01
70e-BTEC
BAT-EXTENDED-02
Power
on page 10-5)
Auxiliary Battery Well
on page 3-16.
Battery Specification
Li-ion 3.7V, 6.179 watt hour
Li-ion 3.7V, 12.358 watt hour
(see page 10-3) in 4 hours for the standard battery or 6
Guidelines for
10 - 1

Advertisement

Table of Contents
loading

Table of Contents