Honeywell Dolphin 70e Black User Manual page 56

Hide thumbs Also See for Dolphin 70e Black:
Table of Contents

Advertisement

If your model is not equipped with a battery door lock:
a. Remove the battery door and release the battery retention strap.
b. Pull the battery latch back and remove the battery. Do not pull on the battery retention strap
when attempting to remove the battery.
3. Lift the card retention flap for the appropriate socket.
4. If you are replacing the memory card, slide the existing card out of the memory socket.
Note: Memory card use is recommended to avoid potential application errors or possible data loss.
5. Slide the SIM and/or replacement memory card (contacts facing down) into the appropriate socket,
then close the retention flap.
6. Insert the battery. Secure the battery retention strap if applicable for your model type.
7. Install the battery door. Engage the battery door lock if applicable for your model type. The terminal
begins booting as soon as power is applied.
3 - 18
Battery
Retention
Strap
SIM Card
Retention Flap
Memory Card
Retention Flap
Chamfered Corner
of SIM Card
Memory Card
Battery Latch
SIM Card

Advertisement

Table of Contents
loading

Table of Contents