How To Operate - Panasonic WJ-ND300 Operating Instructions Manual

How to Operate

Screenshot 1
Click the [Search] button in the [Search] box of the
[Control] tab. The REC event search window is dis-
played.
18
CAM: Site alarm
PRE: Pre-event recording
Text: When text information is attached to the recorded
image, "Added" will be displayed. When text infor-
mation is not attached to the recorded image,
"None" will be displayed.
Step 1
Select searching conditions
• Time & Date
Filter by time and dateSelect a start time and an end
time by clicking the [i] button.
• REC Events
Filter by recording event. Click to select the desired
recording event to be displayed when filtering by record-
ing events.
• Standard CH
Determine which camera channel is to be used as a
standard time zone when searching.
(It is necessary to determine the primary time and date
by selecting a camera channel when cameras are
installed in two or more countries.)
• Camera
Filter by camera channel. Check the radio button of the
desired camera channel to be searched for.
• Text
Filter by with/without text informationSelect "Added" or
"None" by clicking the [i] button.
When "--" is selected, searching will be performed with-
out filtering by with/without text information.
Step 2
Click the [OK] button.
→
will be displayed in the status display area.
The filtered result will be displayed.
Note:
Click the [All List] button to cancel the filtering.
will go off and all recording events will be
listed.